Institut für Astronomie und Astrophysik
Abteilung Astronomie
Sand 1, D-72076 Tübingen, Germany
Hinweis : Einige Seiten auf astro.uni-tuebingen.de können veraltet
sein und werden nicht mehr aktualisiert.
Note : Some webpages at astro.uni-tuebingen.de may be outdated and
will no longer be updated.
The High Voltage Supply for the Echelle Detector
This photo shows the High Voltage Supply (HV box) for the
Echelle detector .
(Click on the image to get a larger view.)
The HV box contains four serially connected high voltage modules.
They feed the following detector components:
HV1: mesh in front of the detector
HV2: MCP1 and MCP2 and the corresponding inter-MCP voltages
HV3: MCP3
HV4: acceleration voltage MCP - anode
The high voltages may be switched on and off and may be partially also regulated by the
Echelle on board processor :
There are two indipentant switches: one for HV1 and another one for
HV2/3/4.
Voltages HV2 and HV3 may be varied independently by the on board processor.
Technical Data
HV1: Maximum voltage 2.0 kV, nominal voltage 0.5 kV
HV2: Maximum voltage 5.0 kV, nominal voltage 3.2 kV
HV3: Maximum voltage 1.5 kV, nominal voltage 0.6 - 0.8 kV (used for adjustment
of total detector gain)
HV4: Maximum voltage 1.0 kV, nominal voltage 0.2 kV
Manufacturer
[Home Page ]
[ORFEUS ]
[Quick Reference ]
[Feedback ]
(secretariat AT astro.uni-tuebingen.de)
| Impressum
Last modified
07 Feb 2005